Sony SLV-SF990G manual

4	• If you connect the STB using the aerial
	cable :

CURSOR

Press CURSOR M/m/</, to select RF and press OK.

OK

Press CURSOR M/m/</, to highlight PROGRAMME NO. and press OK. Enter the appropriate number using CURSOR M/m and press OK.

SET - TOP BOX

	STB CONNECTION			RF
	TUNER BRAND NO .			- - -
	PROGRAMME NO .			0 6
	RETURN
SELECT		:
SET		:	OK

EXIT : MENU

Getting Started

•If you connect the STB using the Scart (EURO-AV) cable :

Press CURSOR M/m/</, to select LINE-4 and press OK.

	SET - TOP BOX
STB	CONNECTION	LINE4
TUNER BRAND NO.		- - -
RETURN

SELECT :

SET : OK

EXIT : MENU

5 MENU

CURSOR

OK

1 2 3

4 5 6

7 8 9

0

Press CURSOR M/m/</, to highlight TUNER BRAND NO. and press OK. Enter the appropriate number using the programme number buttons. Refer to the table on the next page. Press OK.

Press MENU to exit the menu.

SET - TOP BOX

	STB CONNECTION			RF
	TUNER BRAND NO .			1 2 3
	PROGRAMME NO .			0 6
	RETURN
SELECT		:
SET		:	OK

EXIT : MENU

Notes

•If your VCR is connected to the STB by the aerial cable, enter the programme number of the VCR corresponding to the channel where you have set up the STB output in step 4.

•It is recommended to connect your STB to the LINE-4 connector.

•For some STB, in order to avoid any conflict between the STB controller and the VCR remote commander, be careful not to point the remote commander towards the STB and the VCR at the same time.

•You cannot watch programmes from your STB on the TV while recording unless you record a programme from your STB.

continued

Setting the Set-Top Box

27