Preparation

If message “Information Bar” appears, click OK.

If the information bar appears, click on the bar and select Install ActiveX Control….

If “ Internet Explorer – Security Warning” appears, click Install.

The installation of ActiveX Control starts. When installation is completed, the main viewer or the Motion detection setting menu appears.

Configuring Windows Firewall

The IP Setup Program or SNC audio upload tool may not operate correctly depending on the configuration of Windows Firewall. (No cameras are shown in the list even if they are detected.) In this case, confirm the Windows Firewall configuration as follows:

Example: In case of IP Setup Program

1 Select Control Panel from the Start menu of Windows.

2 Select Security Center of the working field.

3 Select Windows Firewall and select Off in the Windows Firewall dialog.

The cameras will be displayed in the list.

If you want to keep Windows Firewall On, continue with the following steps.

4 Select the “Exceptions” tab.

5 Select Add Program….

10 Assigning the IP Address to the Camera