Using the SNC video

player — Playing Video/ Audio File Recorded on Camera

The supplied SNC video player allows you to play video/audio data recorded on the camera with your computer.

This section explains the setup and operations of the SNC video player.

Downloading the SNC video player

To download the SNC video player, click the Player icon located on the upper part of the main viewer of the camera.

Type the user name and password for the administrator on the download dialog and click OK. (The factory settings of both items are “admin”.)

On the “File Download” dialog, click Save. The SNC video player is saved in the computer.

Note

To operate the SNC video player, a special DLL file is necessary. This file is automatically installed in the computer when you view camera images with the ActiveX viewer.

Using the SNC video player

1 Double-click the SNC video player downloaded from the camera to start this application.

2 Click the icon.

The Select File dialog opens.

3 Select the file you want to play.

Information boxes on the selected file are displayed on the left side of the window as follows:

Each click on the (information) icon switches between “display” and “Not to display” of the file information.

File information

Model name: Model name of the camera with which the file is recorded.

IP address: IP address of the camera with which the file is recorded.

Serial number: Serial number of the camera with which the file is recorded.

Record event: Type of event used for the recording: Sensor input or Motion detection.

Date&time: Recording date and time

Movie: Video Codec

Audio: Audio Codec

Playing a video/audio file

Click (start) to start playing from the beginning of the selected file.

To freeze the movie temporarily, click (pause). Click again to restart playing.

To stop playing, click (stop).

To restart playing, click (start) again. Play stops when the file is played to the end.

To play from a specified point

Move the slider bar below the image display, and the file will play starts according to the position of the slider bar position.

Adjusting the sound

Adjust the playing sound volume by moving the

slider bar. Move it to the left end for the minimum volume, and to the right end for the maximum volume.

Click the speaker icon to enable/disable the sound muting.

When the sound muting is on, no sound is heard even if you move the slider bar to the right.

Saving an image

Click (capture) icon during playing or pause and the captured image is displayed on a pop-up dialog. To save the image, click Save on the dialog. You can specify the destination to which the image is to be stored and select the JPEG or Bitmap format.

Others

Using the SNC video player — Playing Video/Audio File Recorded on Camera

71