Recording Images in Memory

— Image memory setting Menu

When you click Image memory on the Advanced mode menu, the Image memory setting menu appears.

By using the image memory function, you can record the image and audio file, which has been shot being linked with the external sensor input or with the built-in motion detection function, to the built-in memory (about 8 MB) of the camera. The image file can also be recorded periodically.

The recorded image and audio files can be found or downloaded to the computer using the FTP server function. (See “Downloading Images from the Camera

— FTP server setting Menu” on page 52.)

Image memory setting menu is composed of three tabs Common, Alarm recording and Periodical recording.

Notes

•The image and audio files recorded in the built-in memory will be erased when the power of the camera is turned off.

•The frame rate and operability on the main viewer may decrease during image storage in the built-in memory.

•When the Overwrite is set to On, a warning mail is not sent to the Administrator.

Common Tab — Setting the Image memory Function

Image memory

Set whether you use the Image memory function or not. When you select On, the Common setting options are displayed in the below. If you do not use it, select Off and click OK.

Free space

Shows the current free space of the builtin memory.

Overwrite

Select to overwrite the file or not when there is insufficient memory space to record the image.

Select On to allow overwriting. The oldest file or folder is overwritten first.

Select Off to prohibit overwriting. In this case, a new file cannot be stored.

Capacity warning

Select On to send a warning mail to the Administrator when the built-in memory space is low or the memory is full. Select Off if you do not want to send a warning mail.

Note

When the Overwrite is set to On, a warning mail is not sent to the Administrator.

SMTP server name

Type the name of the SMTP server to use for sending an e-Mail, up to 64 characters.

Otherwise type the IP address of SMTP mail server.

Authentication

Select the authentication required if you send a mail. None: Select if no authentication is required when an e-

mail is sent.

SMTP authentication: Select if authentication is required when an e-Mail is sent.

POP before SMTP: Select if POP before SMTP authentication is required when an e-Mail is sent.

POP server name

This is necessary when POP before SMTP is selected in Authentication.

Type POP (receiving mail) server name up to 64 characters. Otherwise type the IP address of POP server. This setting is necessary when SMTP server that sends a mail authenticates using the account of POP user.

User name, password

Type the user name and the password of the user who has the mail account. This setting is necessary when SMTP server that sends a mail authenticates.

Administrator e-Mail address

Type the e-Mail address of the recipient of the warning mail (e-Mail address of the camera Administrator), up to 64 characters.

Camera the Administrating

Recording Images in Memory — Image memory setting Menu

49