Note

You can access the camera even from a computer having an IP address whose access right is set to Deny, if you enter the user name and password set for the Administrator boxes in the User setting menu.

OK/Cancel

See “Buttons common to every setting menu” on page 29.

Sending an Image via

mail — e-Mail (SMTP) setting Menu

When you click SMTP on the Advanced mode menu, the SMTP setting menu appears.

By using e-Mail (SMTP) function, you can send a mail with attached image file which has been shot linked with the external sensor input or with the built-in motion detection function. The image file can also be sent periodically.

The e-Mail (SMTP) setting menu is composed of three

tabs: Common, Alarm sending and Periodical sending.

Common Tab — Setting the e-Mail (SMTP) Function

Camera the Administrating

e-Mail (SMTP)

Select On when you use the e-Mail (SMTP) function. The common setting options are displayed below.

If you do not wish to use the e-Mail (SMTP) function, select Off and click OK.

Notes

•During transmission of an image file via mail, the frame rate and operation performance of the monitor image of the main viewer decline.

•While the camera video mode is set to MPEG4, the image of the composite video signal output from the video output connector of the camera may be distorted during mail transmission.

•You cannot send an audio file by using the mail sending function.

Sending an Image via mail — e-Mail (SMTP) setting Menu

43