Auto detect: Select On to obtain the proxy setting automatically from Internet Explorer.
Proxy address: Type the IP address or host name of the proxy server.
Proxy port: Type the port number used for communications with the proxy server.
Note
The Proxy setting is applicable to all cameras. You cannot use individual proxy settings for each camera.
Codec
Select the audio mode (Codec) from the
Save camera setting
Check this box to store the current settings and camera list in the Setting tab. The same settings will be recalled when the camera is rebooted.
Click this button to hide the camera list. Click it again to display the camera list.
Target camera(s) (Camera list)
When the SNC audio upload tool starts, it automatically detects Sony network cameras connected to the local network and displays them in the camera list. Up to 256 cameras can be displayed in the list.
Select the check box on the left of the row to enable audio transmission and audio file uploading for that camera. You can then enable these functions simultaneously for multiple cameras.
Notes
•If you are using Windows XP Service Pack 2 or Windows Vista, disable the Windows Firewall function. Otherwise the camera list may not be displayed automatically. For details, see “Configuring Windows Firewall” in “When using Windows XP Service Pack 2” on page 10 or “Configuring Windows Firewall” in “When using Windows Vista” on
•The SNC audio upload tool cannot detect the cameras that are connected to the local network after the program has started.
•The SNC audio upload tool cannot detect the network cameras that are not equipped with the audio feature.
Camera select checkbox: The check box is located on the left end of the row. Select this check box to enable audio transmission and audio file uploading for that camera.
MAC address: Displays the MAC address of the network camera.
IP address: Displays the IP address of the network camera. “DHCP” is shown at the end of the IP
address when the IP address is obtained with a DHCP server.
Model: Displays the model name of the network camera.
Serial: Displays the serial number of the network camera.
User: Displays the specified user ID and password. The password is shown with turned letters.
Select all
Click to select all the cameras in the camera list. This is usable when you delete all the cameras from the list or specify the same user ID and password for all the cameras,
User ID/Password
Use this item when you specify the user ID and password to communicate with the selected camera(s) only.
Select the camera(s) from the camera list and click this button, and the following dialog opens.
Type the user ID and password for the administrator and click OK.
Note
If you select multiple cameras from the camera list, the same user ID and password are set for all the selected cameras. The factory settings of both items are “admin.”
Add
Use this item when you add a new network camera to the camera list manually. Click this button, and the following dialog opens.
Others
Using the SNC audio upload tool — Transmitting Audio to Camera 67