By selecting Image memory and clicking , a still image of the moment you click is captured, and the image file is recorded in the built-in memory.

When you click Image memory button, the Trigger (setting) Image memory menu is displayed. You can set necessary options here. The setting options and setting procedures are the same as those of the Image Memory setting menu (page 49).

Alarm output

Checking this box allows you to select Alarm output from the trigger drop-down list in the main viewer. You can control On (short circuit ) or Off (open) by selecting Alarm output and clicking the .

OK/Cancel

See “Buttons common to every setting menu” on page 29.

Setting the Schedule

— Schedule setting Menu

When you click Schedule on the Advanced mode menu, the Schedule setting menu appears.

This is the same menu as the setting menu which is displayed when you click Schedule to set Effective period and Schedule in FTP client setting menu, e-Mail (SMTP) setting menu, Image memory setting menu, Alarm out setting menu and so on.

Example: When setting e-Mail (SMTP) (the alarm sending) in the Schedule setting menu

Camera the Administrating

Schedule selection

Select the list box to specify the schedule you want to set. e-Mail (SMTP) – Alarm, e-Mail (SMTP) – Periodical, FTP – Alarm, FTP – Periodical, Image memory – Alarm, Image memory – Periodical, Alarm output – Alarm or Alarm output – Timer can be selected.

The time period on the right of the checked day is the effective period of the schedule.

Mon (Monday) to Sun (Sunday)

The time period on the right of the checked day is the effective period of the schedule.

Start time, End time

Specify the Start time and the End time.

Use the same time schedule every day

When this is checked, the Start time and End time set to Mon (Monday) are applied to all days. In this case, the Start time and End time of the other days than Mon (Monday) cannot be input.

OK/Cancel

See “Buttons common to every setting menu” on page 29.

Setting the Schedule — Schedule setting Menu

55