Tip
A consecutive number added to Date & time and Sequence number is used to identify each of multiple files created with one alarm event.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input: The external sensor which is connected to the sensor input of the camera I/O port.
Motion detection: Click Motion detection button, and the Motion detection setting menu is displayed. You can set the motion detection function (page 57).
Note
Motion detection works only when the camera Video mode is set to MPEG4 and the Cropping is set Off.
Effective period
Set the period when the alarm detection is effective. Always: The alarm detection is always effective. Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the other section.
Click Schedule and the setting menu for the Effective period is displayed. (“Setting the Schedule
— Schedule setting Menu” on page 55)
OK/Cancel
Periodical sending Tab — Setting the periodical mail sending mode
You can set to send mails periodically.
Periodical sending
Select On when you want to send mails periodically. If you select Off, Periodical sending is not executed.
Image file name
Type the file name of the image attached to the mail up to 10 alphanumeric, - (hyphen) and _ (under score).
Suffix
Select a suffix added to the file name used when the mail is sent.
None: The name of the sent file will be the Image file name.
Date & time: The date & time suffix is added to the Image file name.
The date & time suffix consists of lower
Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 is added to the Image file name.
Sequence number clear
Click Clear and the suffix of the sequence number returns to 1.
Interval
Type the interval at which you want to send a mail periodically. You can set the hour (H) and minutes (M) between 30 minutes and 24 hours (one day).
Camera the Administrating
Sending an Image via mail — | 45 |
|
|