If “Setting OK” is displayed, the IP address is correctly assigned.

12 To access the camera directly, double-click the camera name in the list.

Example: In case of IP Setup Program

If message “Internet Explorer” appears, click Yes.

If message “File Download – Security Warning” appears, click Run.

Preparation

Tip

The factory setting of the camera network is as follows.

IP address: 192.168.0.100

Subnet mask: 255.0.0.0

The welcome page of the network camera is displayed in the Web browser.

Note

If you select Save in the “File Download – Security Warning” dialog, you will not be able to perform installation correctly. Delete the downloaded file, and click the Setup icon again.

If message “Internet Explorer – Security Warning” appears, click Run.

Note

If the IP address is not set correctly, the welcome page does not appear after step 12. In this case, try to set the IP address again.

When using Windows XP Service Pack 2Installing software

A warning message regarding the active contents may appear when you install software such as IP Setup Program from CD-ROM. In this case, operate as follows:

The software installation starts.

Installing ActiveX Control

During installation of ActiveX Control, the information bar or “Security Warning” may appear. In this case, operate as follows:

Assigning the IP Address to the Camera

9