Recording a Still Image

in the Built-in Memory of

the Camera

You can capture a camera image as a still image and record it in the built-in memory of the camera.

To use this function, you need to make Image memory active and to set details of the image memory in the trigger setting menu on the Advanced mode menu (page 54).

1 Monitor the image on the monitor window.

2 Select Image memory from the Trigger list box.

3 Click .

The still image of the moment when you click is captured, and the image file is recorded in the builtin memory of the camera.

Controlling Alarm output

You can control the Alarm output On (short-circuit) and Off (open).

To use this function, you need to make Alarm output active in the Trigger setting menu on the Advanced mode menu (page 55).

1 Monitor the image on the monitor window.

2 Select Alarm output from the Trigger list box.

3 Click .

Each click switches the Alarm output between On (short-circuit) and Off (open) alternately.

Tip

For the connection of peripheral devices to the Alarm output of the I/O port, see the supplied Installation Manual.

Camera the Operating

Recording a Still Image in the Built-in Memory of the Camera / Controlling Alarm output

23