Easy mode (e-Mail)

This is displayed when you click e-Mail (SMTP) of the Easy mode menu.

Note

While the camera video mode is set to MPEG4, the image of the composite video signal output from the video output connector of the camera may be distorted during mail transmission.

e-Mail (SMTP)

Select On when you use e-Mail (SMTP) function. When you select On, setting options are displayed. If you do not use it, select Off and click OK below.

SMTP server name

Type the SMTP (sending mail) server name up to 64 characters, or type the IP address of the SMPT server.

Authentication

Select the authentication required when you send an e- Mail.

None: Select when no authentication is necessary when an e-mail is sent.

SMTP Authentication: Select when authentication is necessary when an e-mail is sent.

POP before SMTP: Select when POP before SMTP authentication is necessary when an e-mail is sent.

POP server name

Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account.

User name, Password

Type the user name and password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-Mails performs authentication.

Recipient e-Mail address

Type the address to which you send e-Mails to up to 64 characters. If you want to send to two or more addresses, set them in the e-Mail (SMTP) setting menu (page 43) of the Advanced mode menu.

Administrator e-Mail address

Type the e-Mail address of the administrator of the camera up 64 characters.

This will be the address for return mail and system mail from the mail server.

Subject

Type the subject up to 64 characters.

Message

Type the text up to 384 characters (Return corresponds to two characters).

Mode

Set the e-Mail sending mode.

Motion detection: When the camera detects any action, it sends the image file.

If you select Motion detection, the camera detects activity in the shooting image due to the built-in motion detection function. Then the camera sends the e-Mail with the attached image file.

Set the details of the motion detection of the camera in the Motion detection setting menu (page 57) of the Advanced mode menu.

Note

The picture attached to the e-Mail is of the moment the motion detection function of the camera works. If the next activity is detected during processing of the image of the first detection, the process will be rejected.

The motion detection function may not work properly in the following cases.

•During camera setting operation in the Camera setting menu.

•When the object is dark.

•When the camera is shaken because the installation location is unstable.

Camera the Administrating

Basic Operations of Easy mode 27