Click the left button of the mouse on the still image and drag it diagonally. The red frame that appears as you drag indicates the cropping area.

Still image

Red trimming

Click the left button of the mouse on

frame

the still image and drag it.

4 Click OK at the bottom of the window.

The cropped image is displayed on the main viewer.

5 To close the image, click in the upper-right corner.

Color

Select Color or Monochrome for the image.

Image flip

The image can be displayed upside down. Select On when you fix the camera to the ceiling.

Microphone

Select whether you send the audio from the built-in microphone or from the mmicrophone input connector. Select On to send the audio from this network camera.

Note

When you change the Microphone setting, click Refresh on the Web browser to reflect the change when opening main viewer page.

Mic volume

Set the volume level of the audio input from the built-in microphone or the mmicrophone input connectors. It is adjustable from –10to +10.

Audio codec

Select the bit rate when you send the audio from the built-in microphone or from the m microphone input connectors. G.711 (64kbps), G.726 (40kbps), G.726 (32kbps), G.726 (24kbps) or G.726 (16kbps) can be selected.

Note

When the bit rate is set to other than G.711(64bps), the audio is not output in case of using Java applet viewer.

Speaker output

Set whether you output the audio sent from the computer connected with the audio input connector to the speaker (active speaker for example) of the camer aconnected via line output connectors using SNC audio upload tool included in the supplied CD-ROM.

Select On to accept the audio data transmission from SNC audio upload tool.

OK/Cancel

See “Buttons common to every setting menu” on page 29.

Picture Tab

You can set the color condition, exposure, etc. of the camera.

White balance

Select the white balance mode from among Auto, Indoor, Outdoor, One push WB, and Manual. Auto: to automatically adjust the white balance Indoor: to adjust the white balance for shooting indoors

under an incandescent lamp (about 3200 K)

Outdoor: to adjust the white balance for shooting outdoors (about 5800 K)

One push WB: The One push trigger button is displayed. Click the button to adjust the white balance instantly.

Manual: When you select this, R gain and B gain are displayed and you can set them.

Selectable gain values are from 0 to 255.

Camera the Administrating

Setting the Camera Image and Audio — Camera setting Menu

35