Others
This section explains how to use the application software and commands, including the supplied CD- ROM.
Using the Supplied Setup Program
Explains the functions except the Network tab in the Setup Program.
To install the Setup Program, to assign the IP address and to set the network, see “Assigning the IP address to the Camera” on page 7 in “Preparations”.
Notes
•The IP Setup Program may not operate correctly if you use a personal firewall or antivirus software in your computer. In that case, disable the software or assign an IP address to the camera using another method. For example, see “Assigning the IP Address to the Camera Using ARP Commands” on page 74.
•If you are using Windows XP Service Pack 2 or Windows Vista, disable the Windows Firewall function. Otherwise the IP Setup Program will not operate correctly. For the setting, see “Configuring Windows Firewall” in “When using Windows XP Service Pack 2” on page 10 or “Configuring Windows Firewall” in “When using Windows Vista” on
Starting the Setup Program
Select Program from Start menu of Windows, then select Program, IP Setup Program and IP Setup Program in sequence.
The IP Setup Program starts.
Network tab appears. The IP Setup Program detects cameras connected to the local network and lists them on the Network tab window.
When you are using Windows Vista, message “User Account Control – An unidentified program wants access to your computer” may appear. In this case, click Allow.
Bandwidth Control Tab
The communication bandwidth can be set when the Video mode of the camera is set to JPEG.
Note
When the Video mode of the camera is set to MPEG4, the bandwidth cannot be changed.
1 Click the Bandwidth control tab to display the bandwidth setting window.
The current bandwidth is displayed in Current bandwidth.
2 Click to select the camera to set the bandwidth from the list box.
3 Click to select the desired bandwidth from the Setting bandwidth list box.
4 Type the Administrator name and Administrator password in each box.
The factory settings of both items are “admin.”
5 Click OK.
If “Setting OK” is displayed, the bandwidth setting is completed.
Others
Using the Supplied Setup Program | 63 |
|
|