Still image

Red zooming frame Click the left button of the mouse on the still image and drag it.

Zoom an image by the camera zoom bar

When you can control this function, the zoom bar is displayed below the window.

You can specify a location to be zoomed by clicking the zoom bar.

The zoom bar is displayed /not displayed by clicking the icon below the image frame.

WIDE marge icon: Click to move the zoom to the WIDE Merge (the same magnification).

TELE marge icon: Click to move the zoom to the TELE Merge (3-fold magnification).

Not to display the zoom bar

When you are not going to use the zoom bar, it is not

displayed by pressing button under the panorama window.

Moving the camera to the preset position

Select the preset position name from the PRESET list box. Then, the camera will move to the preset position that you have stored in memory at “Preset position setting Menu”.

Controlling the camera on a panorama image

When you can control the camera, the panorama widow is displayed under the normal camera window.

In the panorama window, an image around the camera is displayed as a panorama image. When you click on the displayed panorama image, the camera faces the clicked place.

Normal camera window

 

 

SNC-P5

panorama window

 

Creating the panorama image

Create the panorama image with the supplied “SNC panorama creator”. Refer to page 70 for details.

Tip

The panorama image is the still image converted from the image taken when you were going to create a panorama image with “SNC panorama creator”. When the camera is moved or when the layout around the camera is changed, create the panorama image again.

Facing the camera toward the specified point

1 Create a panorama image with “SNC panorama creator” and display it.

Camera the Operating

Controlling the camera on a panorama image

23