Camera the Administrating

procedures are the same as those of the Image Memory setting menu (page 53).

Alarm output

After checking this, you will be able to select Alarm output in the Trigger setting menu. You can control On (short circuit ) or Off (open) by selecting Alarm output and clicking the Trigger icon.

One Time Tour

After checking this, you will be able to select One time tour in the Trigger list box.

Select One time tour in the trigger box and click the trigger icon, then One time tour starts.

Up to 8 positions can be programmed, and the camera moves to the programmed positions sequentially. The camera stops when it moves to the last preset position.

When you click One time tour, One time tour setting menu is displayed.

Stay time

Set the stop time in each preset position (1 to 3600 seconds).

Speed

Select the moving speed from the list box. The value is higher, the moving speed is faster.

Sequence

Select and set the preset number 1 to 8 for each of 8 list boxes.

The camera moves to the preset position saved in the selected preset number sequentially. The sequence of camera movement starts from the preset position specified in the list boxes from left to the right. The camera stops when it moves to the right most.

If you select End in the list box, the program ends before it and the camera stops.

Preset position table

The programmed preset position names are displayed.

OK/Cancel

See “Buttons common to every setting menu” on page 31.

60 Setting the Operations from the Viewer Page — Trigger setting Menu