6 Retype the password for the user ID in the Re-type password box.

7 Set the DNS server address.

To obtain the DNS server addresses automatically:

Select Obtain DNS server address automatically.

To specify the DNS server addresses manually: Select Use the following DNS server address, and type the Primary DNS server address and Secondary DNS server address in each box.

8 Type the Administrator name and Administrator password in each box.

9 Click OK.

If “Setting OK” is displayed, the PPPoE setting is completed.

Rebooting the Camera

Click Reboot on the Network tab to reboot the camera. It will take about two minutes to start again.

Using the SNC audio

upload tool — Transmitting Audio to Camera

The supplied SNC audio upload tool allows you to transmit sound from the computer to the camera. This section explains the setup and operations of the SNC audio upload tool.

The SNC audio upload tool supports the following audio data to be transmitted.

Audio CODEC

Transmission rate

 

 

G711 (µ-LAW)

64 kbps

 

 

G.726

40 kbps

 

 

G.726

32 kbps

 

 

G.726

24 kbps

 

 

G.726

16 kbps

 

 

Note

Only one administrator can transmit sound to the camera. Meanwhile, other user with administrator ID and a password will not be able to transmit sound to the camera.

Installing the SNC audio upload tool

1 Insert the supplied CD-ROM disc into your computer CD-ROM drive.

After a short time a window will open displaying the files on the CD-ROM.

2 Click the Setup icon of SNC audio upload tool. The “File Download” dialog opens.

3 Click Open.

Note

If you click “Save this program to disk” on the “File Download” dialog, you cannot install correctly. Delete the downloaded file, and click Setup icon again.

4 Install the SNC audio upload tool following the wizard displayed.

If the Software License Agreement is displayed, read it carefully and accept the agreement to continue the installation.

Others

Using the SNC audio upload tool — Transmitting Audio to Camera 67