Camera the Administrating

displays in the below. If you do not use it, select Off and click OK.

Built-in memory

It displays the free spaces of the built-in memory you can write in at present.

A-slot

It displays the free spaces of the CF memory card you can write in at present.

Selected root directory

Select a memory in which you want to save an image. Built-in memory: built-in memory of this camera

(approximately 8 MB)

A-slot:CF memory card inserted into the slot in the front side of the camera

Overwrite

Select to overwrite the file or not when there is insufficient memory space to record the image.

Select On to allow overwriting. The oldest file or folder is overwritten first.

Select Off to prohibit overwriting. In this case, a new file cannot be stored.

Capacity warning

Select On to send a warning mail to the Administrator when the built-in memory space is low or the memory is full. Select Off if you do not want to send a warning mail.

Note

When the Overwrite is set to On, a warning mail is not sent to the Administrator.

SMTP server name

Type the name of the SMTP server you want to use for sending the warning mail, up to 64 characters. Otherwise type the IP address of SMTP mail server.

Authentication

Select the authentication required when you send an alarm mail.

Off: Select if no authentication is necessary when an e- mail is sent.

On: When authentication is necessary an e-mail is sent, select one of the authentication methods from the followings.

SMTP: Select if SMTP authentication is necessary when an e-mail is sent.

POP before SMTP: Select if POP before SMTP authentication is necessary when an e-mail is sent.

Note

When you set to On, be sure to select either or both SMTP or/and POP before SMTP.

POP server name

This is necessary when POP before SMTP is selected in Authentication.

Type POP (receiving mail) server name up to 64 characters. Otherwise type the IP address of POP server. This setting is necessary when SMTP server that sends a mail authenticates using the account of POP user.

User name, password

Type the user name and the password of the user who has the mail account. This setting is necessary when SMTP server that sends a mail authenticates.

Administrator e-mail address

Type the E-mail address of the recipient of the warning mail (E-mail address of the camera Administrator), up to 64 characters.

OK/Cancel

See “Buttons common to every setting menu” on page 31.

Alarm recording Tab — Setting the Image Memory Function when Detecting the Alarm

You can set to record the image and audio file to the memory linked with the external sensor input or with the built-in motion detection function.

54 Recording Images in Memory — Image memory setting Menu