Manuals / Brands / Photography / Security Camera / Sony / Photography / Security Camera

Sony SNC-P5 Dynamic IP address notification Tab — Notifying the IP Address, PPPoE Tab - Setting of PPPoE Connection, PPPoE, User ID, Password, OK/Cancel, IP address

1 79

Download 79 pages, 2.31 Mb

Camera the Administrating

PPPoE Tab - Setting of PPPoE Connection

Use it when you connect the camera with PPPoE (Point- to-Point Protocol over Ethernet). PPPoE connection is the protocol that is widely used in xDSL (digital affiliate line such as ADSL, VDSL or SDSL) as the authentication and connection system.

PPPoE

Set whether you connect the camera using PPPoE function or not. When On is selected, PPPoE connection is used.

IP address

When you connect to the network by PPPoE function, IP address obtained at PPPoE connection is displayed.

User ID

Type the user ID for the authentication necessary for PPPoE connection. Type it up to 64 characters.

Password

Type the password for the authentication necessary for PPPoE connection. Type it from 1 to 32 characters.

Re-type password

To certain the password, re-type the characters as them typed in the password box.

Obtain DNS server address automatically

Select it to obtain the address of DNS server automatically.

Use the following DNS server address

Select this when you set the fixed address as the IP address of DNS server.

Primary DNS server

Type the IP address of the primary DNS server.

Secondary DNS server

Type the IP address of the secondary DNS server.

OK/Cancel

See “Buttons common to every setting menu” on page 31.

Dynamic IP address notification Tab — Notifying the IP Address

When the DHCP setting is set to On or PPPoE setting is set to On on the Network tab, you can send notification of the completion of the network settings using the SMTP or HTTP protocol.

e-Mail (SMTP) notification

Select On to send an e-Mail when the DHCP setting is completed.

SMTP server name

Type the name or IP address of the SMTP server you want to use for sending an e-Mail, up to 64 characters.

Authentication

Select the authentication required when you send an e- Mail.

Off: Select if no authentication is necessary when an e- mail is sent.

On: When authentication is necessary an e-mail is sent, select one of the authentication methods from the followings.

SMTP: Select if SMTP authentication is necessary when an e-mail is sent.

44 Configuring the Network — Network setting Menu

Contents

User’s Guide SNC-P5 Owner’s Record WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture AC power adaptor WARNING NOTICE TO USERS Table of Contents Setting the Alarm Output Setting the Operations from the Viewer Page — Setting the Schedule Others Overview Features Precautions How to Use This User’s Guide System Requirements Preparation Assigning the IP Address to the Camera Page Accessing the Camera Using the Web Browser When using antivirus software in the computer Basic Configuring by the Administrator Operating the Camera Administrator and User Logging in to Homepage — Welcome Page Displaying the setting window for the administrator directly About Viewers ActiveX viewer Java applet viewer Configuration of Main Viewer Home Player Camera Control Section Frame rate View size Digital zoom Capture Monitor Image Controlling the Monitor Image Capturing a Monitor Image Operating the camera Controlling the camera on a panorama image Sending an Image File Recording a Still Image in the Memory of the Camera Controlling Alarm output Starting One Time Tour Switching TCP/UDP Transmission Mode Page Administrating the Camera Basic Operations of Easy mode White balance Brightness Image quality Image size Easy mode (e-Mail) SMTP server name POP server name User name, Password Recipient e-mailaddress Administrator e-mailaddress Subject Basic Operations of Advanced mode Menu General note on setting menus Configuration of Advanced mode Menu Configuring the System — System setting menu Exclusive control mode OK/Cancel Date & time Tab Current date & time PC clock Date & time format Adjust Initialize Tab Reboot Factory default Backup setting data Restore setting System log Tab System log Access log tab Access log Setting the Camera Image and Audio — Camera setting Menu Color Mic volume Audio codec Picture Tab Exposure mode Saturation Sharpness Contrast User preset MPEG4 Tab Bit rate I-pictureinterval Auto rate control JPEG Tab Configuring the Network — Network setting Menu Subnet mask Default gateway Use the following DNS server address Wireless Tab — Setting of Wireless Connection SSID Type WEP WEP key/Retype WEP key Antenna Dynamic IP address notification Tab — Notifying the IP Address HTTP notification URL Proxy server name Proxy port number Method Setting the User — User setting Menu Setting the Security — Security setting Menu Sending an Image via mail — e-Mail(SMTP) setting Menu mail Alarm sending Tab — Setting the mail sending mode when detecting the alarm File attachment Image file name Suffix Sequence number clear Periodical sending Tab — Setting the periodical mail sending mode Sending Images to FTP Server — FTP client setting Menu Periodical sending Tab — Setting the Periodical FTP Client Activity Recording Images in Memory — Image memory setting Menu Built-inmemory A-slot Selected root directory Overwrite Capacity warning Periodical recording Tab — Setting the Periodical recording mode Efective period Directory Structure of Image Memory About the extension of a file Downloading Images from the Camera — FTP server setting Menu Setting the Alarm Output — Alarm output setting Menu Setting the Operations from the Viewer Page — Trigger setting Menu One Time Tour Preset position table Setting the Schedule — Schedule setting Menu Setting the Alarm Buffer — Alarm buffer setting Menu Setting the Motion Detection Function — Motion detection setting Menu Setting the Motion Detection Area, Sensitivity and Threshold level Saving the Camera Position — Preset position setting Menu Position Others Using the Supplied Setup Program Date time Tab PPPoE Tab Using the SNC audio upload tool — Transmitting Audio to Camera upload tool Connecting the Camera to the Computer On Windows On Windows XP Using the SNC audio upload tool N(start)/x(stop) Using the SNC video player — Playing Video/ Audio File Recorded on Camera player How to use SNC panorama creator Using the Custom Homepage Installer — Setting an Original Homepage Uploading the Custom Homepage Installer to the Camera Page Assigning the IP Address to the Camera Using ARP Commands Using the SNMP Page Specifications Supplied accessories Optional accessories Index