Recording a Still Image

in the Memory of the

Camera

You can capture a camera image as a still image and record it in the memory of the camera. “Memory” contains Built-in memory and CF memory card, and you can select one of them in the setting window.

To use this function, you need to make Image memory active and to set details of the image memory in the Trigger setting menu on the Advanced mode menu (page 59).

1 Monitor the image on the monitor window.

2 Select Image memory from the Trigger list box.

3 Click Trigger icon.

The still image of the moment when you click is captured, and the image file is recorded in the memory of the camera.

Controlling Alarm output

You can control the Alarm output On (short-circuit) and Off (open).

To use this function, you need to make Alarm output active in the Trigger setting menu on the Advanced mode menu (page 59).

1 Monitor the image on the monitor window.

2 Select Alarm output from the Trigger list box.

3 Click Trigger icon.

Each click switches the Alarm output between On (short-circuit) and Off (open) alternately.

Tip

For the connection of peripheral devices to the Alarm output of the I/O port, see the supplied Installation Manual.

Camera the Operating

Recording a Still Image in the Memory of the Camera / Controlling Alarm output

25