1 Control PanTilt of the camera to face it to the position, which will be the basis of the exposure and the white balance.
The exposure and the white balance are fixed while creating a panorama image.
2 Click Make button.
PanTilt of the camera moves, and it starts to create a panorama image.
It takes about two minutes to create a panorama image, then it is displayed on the top of Main tab.
3 Click Send button to send it to the camera.
Notes
•Do not operate the camera settings, move the camera or so while creating a panorama image.
•When you move the camera equipment, create the panorama image again.
Saving an image to the cameraYou can save the image you have already prepared to the camera as a panorama image.
Tips
There are the following restrictions for the image to be saved to the camera.
•It must be JPEG format or Bitmap format.
•Its’ size must be 320 pixel (width) and 90 pixel (height).
1 Click File open button of Main tab.
The dialog of “Open the file” is displayed.
2 Select the image you have prepared.
3 Click Send button to send the image to the camera.
Using the Custom Homepage Installer —
Setting an Original Homepage
You can store the homepage that you have created in the camera and watch it using the supplied Custom Installer.
Notes on creating the homepage
When you creating the homepage, note the following points.
•The file name should be typed up to 24 characters including the extension.
•The file size of the homepage should be 2.4 MB or less.
•To watch the created homepage, set the Default URL in the System setting menu.
Uploading the Custom Homepage Installer to the Camera
1 Insert the supplied
2 Click the Setup icon of Custom Homepage Installer.
The “File Download” dialog opens.
3 Click Open.
The installer starts and notes are displayed.
Others
Using the Custom Homepage Installer — Setting an Original Homepage | 71 |
|
|