Overview

How to Use This Manual

This manual explains how to operate the SNC-VL10N/ VL10P Network Camera from a client PC.

This manual is written to be read on the computer display.

As this section gives tips on using this manual, read it before you operate the camera.

Jumping to the related page

When you read this manual on the computer display, click on the sentence to jump to the related page.

Software display examples

Note that the displays shown in this manual are explanatory examples. Some displays may be different from the ones which appear as you operate the application software.

Printing this manual

Depending on your system, certain displays or illustrations in this manual, when printed out, may differ from those as portrayed on your screen.

Installation Manual (printed matter)

The supplied Installation Manual describes the names and functions of parts and controls of the Network Camera, connecting examples and how to set up the camera. Be sure to read the Installation Manual before operating.

Precautions

Operating or storage location

Avoid operating or storing the camera in the following locations:

•Extremely hot or cold places (Operating temperature: -10°C to +50°C [14°F to 122°F])

•Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)

•Close to sources of strong magnetism

•Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters

Transportation

When transporting the camera, repack it as originally packed at the factory or in materials of equal quality.

Cleaning

•Use a blower to remove dust from the lens or optical filter.

•Use a soft, dry cloth to clean the external surfaces of the camera. Stubborn stains can be removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry.

•Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface finishes.

About the fan

To prevent internal heat buildup, the camera has a builtin fan. If the frame rate of the camera becomes 1 fps although the other frame rate value has been set using the Frame Rate menu on the Web screen, the built-in fan may be damaged. In this case, contact your authorized Sony dealer.

About the MAC address

The MAC address of the camera may change when the main board has been replaced by the service personnel.

About the software

For the latest software information, contact your authorized Sony dealer.

How to Use This Manual / Precautions 5