Inter-alarm Event Detection Time
Type the duration, between 5 and 60 seconds, during which the camera can detect the next alarm input.
Showing Pop-up
You can set for displaying “SI” (Sensor Input) pop-up on the lower-right of the monitor image when an alarm output is detected.
Select On to show a pop-up, or Off not to show it.
Notes
•To show the pop-up on the Firewall Viewer, check on Show in the Caption menu when you are using the Firewall Viewer. (See “Caption” on page 10.)
•The pop-up is not displayed when the Java Applet Viewer is used.
Output 2
Set up Output 2 of the Sensor I/O port.
Output 2 can output an alarm triggered by the sensor input or manually.
Output Status Control
Select Active to keep Output 2 of the Sensor I/O port usually open and short-circuit it only when an alarm is output. Select De-Active to keep Output 2 usually short-circuited and open it only when an alarm is ouput.
Alarm Event-Based Output Activation Function Select SI to synchronize the output from Output 2 of the Sensor I/O port with an alarm by the sensor input, or Manual to output manually by clicking the Sensor 2 button on the viewer page.
Output Active Duration Time
Type the duration of the output from Output 2 between 1 and 60 seconds.
Apply/Cancel/Help
See “Buttons common to every setting page” on page 14.
Configuring the Sensor I/O Port — Sensor I/O Setting Page | 27 |
| |