Owner's Record

The model and serial numbers are located on the top. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. ____________________

Serial No. ____________________

WARNINGTo prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Power Supply

Caution for U.S.A. and Canada

The SNC-Z20N operates on 24V AC, 12V DC or

POWER OVER LAN.

The SNC-Z20N automatically detects the power

Use a Class 2 power supply which is UL Listed (in the U.S.A.) or CSA-certified (in Canada), or IEEE 802.3af applied POWER OVER LAN.

Caution for other countries

The SNC-Z20P operates on 24V AC, 12V DC or

POWER OVER LAN.

The SNC-Z20P automatically detects the power. Use a power supply which complies with the safety regulation of the country where the unit is used, or IEEE 802.3af applied POWER OVER LAN.

For customers in the U.S.A. (SNC-Z20N only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wll not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

2