Camera the Operating

Operating the Camera from the Monitor Image

You can operate zooming of the camera by clicking the mouse on the monitor image. Zooming is also operative using the zoom bar under the monitor image.

For this function, user access right Level 2 to Level 4 is required (see page 29).

To enable this function, click Control on the menu section.

Zooming Using the Center Wheel of the Mouse

When you use the ActiveX viewer, you can zoom in/out using the center wheel of the mouse. Turn the center wheel forward to zoom in, and backward (toward you) to zoom out.

Notes

•This function does not operate when you use a mouse without the center wheel.

•This function does not operate on the Java applet viewer.

•This function may not operate correctly depending on your system environments.

Zooming Using the Zoom Bar

You can operate the optical zoom (×1 to ×18) and the electronic zoom (×1 to ×12) using the zoom bar displayed under the monitor image.

×1

 

×18

 

 

 

 

 

 

 

 

 

 

Optical zoom

 

 

 

×12

 

×1

 

 

 

 

 

 

 

Electronic

 

 

 

zoom

×1

 

 

 

 

×216

 

 

 

 

Optical and electronic zoom

Click to zoom in to the TELE end (×18).

Click to zoom in to the TELE end (×216 with the optical and electronic zoom).

Click to zoom out to the WIDE end (×1).

When you click on the zoom bar, the camera zooms in or out corresponding to the clicked position, and moves to the clicked position.

Notes

•When the Zoom mode menu on the Camera setting page is set to Optical only, only the optical zoom bar appears.

•When you have changed the Zoom mode menu on the Camera setting page, click the Control button on the menu section to update the Zoom mode setting on the zoom bar.

Controlling the Application Manually

You can send an image or output a trigger to control the alarm output, using the image control section on the main viewer page.

For this function, user access right Level 3 or Level 4 is required (see page 28).

Click Trigger on the menu section to display the trigger control parts.

Image control section (trigger control parts)

Sending a Still Image File to an FTP Server

If you select FTP send and click , the current still image is captured and the captured image file is sent to the FTP server.

To use this function, you need to select the Use FTP client function option and the Manual mode on the FTP client setting page.

For details, see “Sending Images to FTP Server — FTP client setting Page” on page 30.

Sending a Still Image via E-mail

If you select Mail send and click , the current still image is captured and an E-mail with the captured image file attached is sent to the E-mail address(es) specified on the SMTP setting page.

To use this function, you need to select the Use SMTP function option and the Manual mode on the SMTP setting page.

For details, see “Sending an Image via E-mail — SMTP setting Page” on page 35.

12 Operating the Camera from the Monitor Image / Controlling the Application Manually