Type the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server.
User nameType the user name for the FTP server.
PasswordType the password for the FTP server.
To confirm the password, type the same characters as you typed in the Password box.
Remote pathType the path to the destination up to 64 characters.
Image file nameType the basic file name you want to assign to the images when sending to the FTP server. You can use up to 6 alphanumeric, - (hyphen) and _ (underscore) for naming.
SuffixSelect the suffix to add to the file name.
None: No suffix is added. The basic file name is assigned to the image to be sent to the FTP server.
Date/Time: The date/time suffix is added to the file name.
The date/time suffix consists of lower
Sequence number: A consecutive number is added to the basic file name. A number of up to 10 digits between 0000000000 and 4294967295 is added to the file name.
Tip
When the Mode menu is set to Alarm, the type of alarm and the capture timing to the alarm are added to the suffix.
Type of alarm: S1 (Sensor), AD (Activity Detection)
Capture timing: PR
Click Apply to reset the Sequence number suffix to 0.
Mode
Select the mode of the FTP client function.
Manual: Sends still images to the FTP server manually. After selecting Manual, click OK. The FTP client function mode is set to Manual.
In this mode, when you click the (Trigger) button on the main viewer page, a still image is captured and sent to the FTP server. (See “Controlling the Application Manually” on page 12.)
Alarm: Sends still images to the FTP server by synchronizing with an external sensor input or the
Note
If the Suffix menu is set to None, you cannot select the Alarm mode. When you want to use the Alarm mode, set the Suffix menu to Date/Time or Sequence number.
Periodical sending: Sends still images to the FTP server periodically. When you select Periodical sending, the Periodical sending mode setting section appears (see page 32).
Back/OKSee “Buttons common to every setting page” on page 17.
Alarm mode setting Section
Alarm
Select the alarm to link the FTP client function. If the selected alarm is detected, the still images before and after the alarm are captured sequentially and sent to the FTP server.
Sensor: External sensor connected to sensor input of the camera I/O port
Activity detection: The activity detection function built in the camera
To set the activity detection function, click Activity detection. The Activity detection setting page appears (see page 44).
Camera the Administrating
Sending Images to FTP Server — FTP client setting Page 31