Camera the Administrating

Available period

Select the period for which the selected alarm mode is available.

Always: The selected alarm mode is available any time.

Use scheduler: The selected alarm mode is available according to the schedule selected in Schedule No. below.

Schedule No.

When Use scheduler is selected on the Available period menu, select the schedule you want the selected alarm mode being available.

Click to select the check box(es) 1 to 6. You can select multiple schedules.

To check the contents of schedules, click Schedule check. (See “Setting the Schedule — Schedule setting Page” on page 43.)

Alarm buffer configuration

Click Alarm buffer to display the Alarm buffer setting page.

For details, see “Setting the Alarm Buffer — Alarm buffer setting Page” on page 42.

Note

If an alarm occurs during the Alarm buffer processing, that alarm is ignored.

Digest viewer

If you select On, an HTML file (.html) and a Java Script file (.js) are added each time the selected alarm is detected.

When you open the added HTML file using a general browser, the digest viewer runs and you can view the still pictures in the alarm buffer in sequence (quasi- animation).

See “Operating the Digest Viewer” on page 33.

Periodical sending mode setting Section

Interval time

Type the interval at which you want to send images to the FTP server periodically. You can set the hour (H), minutes (M) and seconds (S) between 1 second and 24 hours (one day).

Note

The actual interval may be longer than the set value, depending on the image size and the network environments.

Available period

Select the period for which the periodical sending mode is available.

Always: The periodical sending mode is available any time.

Use scheduler: The periodical sending mode is available according to the schedule selected in Schedule No. below.

Schedule No.

When Use scheduler is selected on the Available period menu, select the schedule you want the perdiodical sending mode being available.

Click to select the check box(es) 1 to 6. You can select multiple schedules.

To check the contents of schedules, click Schedule check. (See “Setting the Schedule — Schedule setting Page” on page 43.)

Backup sending mode

You can temporarily store (back up) still image data in the built-in memory (about 8 MB) when uploading to the FTP server is impossible due to a network failure, etc.

When the network recovers, the backup image data is uploaded to the FTP server.

This function is available only when Periodical sending is selected.

Select On to enable the Backup function.

Notes

•The Backup sending mode cannot be set to On when the image memory function (page 38) is activated. When you want to use the Backup function, deactivate the image memory function.

•When the backup memory capacity is full or the backup images exceed 2,560, new image data will not be stored. (The previously stored images are retained.)

•Backup image data is erased when the power of the camera is turned off.

Backup interval time

Specify the interval at which you want to send the backup image data to the FTP server. You can set a value between 1 second and the time set on the Interval time menu.

32 Sending Images to FTP Server — FTP client setting Page