Select the memory you want to store the image to, from the
ATA memory card: ATA memory card inserted into PC card slot of the camera
Notes
•The image recorded in the
•The frame rate and operability on the main viewer page may decrease during image storage.
•Deactivate the image memory function before removing the ATA memory card or turning off the power of the camera with the ATA memory card inserted.
•The image memory function cannot be activated if the Backup sending mode menu is set to On. To use the image memory function, set the Backup sending mode menu to Off.
Recording an Image in the Selected Memory — Image memory setting PageImage file name
Type the basic file name you want to assign to the images when saving in the memory. You can use up to 6 alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is assigned to the image to be recorded in memory.
Date/Time: The date/time suffix is added to the file name.
The date/timer suffix consists of lower
consecutive number (2 digits), thus
Sequence number: A consecutive number is added to
the basic file name. A number of up to 10 digits between 0000000000 and 4294967295 is added to the file name.
Tip
When the Mode menu is set to Alarm, the type of alarm and the capture timing to the alarm are added to the suffix.
Type of alarm: S1 (Sensor), AD (Activity Detection)
Capture timing: PR
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
OverwriteSelect if you overwrite the file or not when there is insufficient memory space to record the image.
Select On to allow overwriting. The oldest file or folder is overwritten first.
Select Off to prohibit overwriting. In this case, a new file cannot be stored.
Capacity warningSelect On to send a warning mail to the Administrator when the
Select Off if you do not want to send a warning mail. If On is selected, the SMTP server name and Administrator
SMTP server name
Type the name or IP address of the SMTP server you want to use for sending the
Administrator
Type the
Mode
Select the mode of the Image memory function.
Manual: Records a still image in the selected memory manually.
In this mode, when you click the (Trigger) button on the main viewer page, a still image is captured and recorded in the selected memory. (See “Controlling the Application Manually” on page 12.)
Alarm: Records a still image in the selected memory by synchronizing with an external sensor input or the
Camera the Administrating
Recording Images in Memory — Image memory setting Page | 39 |
|
|