Camera the Administrating
Type the IP addresses and subnet mask values you want to allow or deny access to the camera.
You can specify up to 10 IP addresses and subnet mask values. For a subnet mask, type 8 to 32.
To temporarily cancel the Default Policy for a specified IP address/subnet mask, select Allow or Deny from the
Tip
The subnet mask value represents the bit number from the left of the network address.
For example, the subnet mask value for 255.255.255.0 is 24.
If you set “192.168.0.0/24, Allow,” you can allow access from the computers having an IP address between 192.168.0.0 and 192.168.0.255.
Note
You can access the camera even from a computer having the IP address whose access right is set to Deny, if you enter the user name and password set for Level 4 access right on the authentication dialog displayed.
OK/Cancel
When you click FTP client on the Administrator menu, the FTP client setting page appears.
Use this page to set up for capturing and sending still images to an FTP server. You can capture a still image at the moment when a trigger occurs by an external sensor input, the
To activate the FTP client function, select Use FTP client function and click OK. The FTP client setting page appears.
When you do not use the FTP client function, select Do not use FTP client function and click OK.
Note
The frame rate and operability on the main viewer page may decrease while a file is being transmitted by the FTP client function.
Setting the FTP Client Function— FTP client setting Page30 Sending Images to FTP Server — FTP client setting Page