1 2 3 4 5 6 | 7 8 9 q; qa qs qd |
SW | L | C | R |
L.F.E. | SL | S | SR |
| SBL | SB | SBR |
INPUT | AUTO I.LINK ;RF COAX OPTANALOG MULTI IN |
| SLEEP | ||||
; DIGITAL EX | 96/24 |
|
|
| D.RANGE | ||
; PRO LOGIC IIx NEO:6 | DISCRETE | H.A.T.S. SB DEC | EQ | ||||
GAME MOVIE MUSIC CINEMA MATRIX |
| STEREO MONO | MEMORY | ||||
|
|
|
|
|
|
|
|
wg | wf wd ws wa w; ql qk qj qh | qg | qf |
ASW: Lights up when sub woofer selection is set to “YES” (page 20). While this indicator lights up, the receiver creates a sub woofer signal based on the LFE signal in the disc being played back or the low frequency components of the front channels. This indicator does not light during the 2CH STEREO mode.
BPlayback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing)), SBL (Surround back Left), SBR (Surround back right), SB (Surround Back (the surround back components obtained by 6.1 channel decoding)), “
” lights up when the 9.1 ch speaker system is activated.
Example:
Recording format (Front/Surround): 3/2
Output channel: When the surround speakers size parameter is set to “NO”
Sound Field: A.F.D. AUTO
A.F.D. 2CH SW in the SURR SET UP menu:
CREATE
(The initial setting is “OFF”)
SW L C R
SLSR
Tip
Use the CUSTOMIZE menu and set “MENU EXPAND” to “ON”. For details, see page 41.
C; DIGITAL (EX): Lights up when Dolby Digital signals are input. “EX” lights up when Dolby Digital EX signals are input. When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to “ANALOG 2CH FIXED” (page 38).
DINPUT: Lights up constantly. One of the input indicators also lights up according to the current input.
EAUTO: Lights up when INPUT MODE is set to “AUTO 2CH” (page 38).
FDTS
GCOAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal or when INPUT MODE is set to “COAXIAL FIXED” (page 38).
HOPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal, or when INPUT MODE is set to “OPTICAL FIXED” (page 38).
IANALOG: Lights up when no digital signal is input to COAXIAL or OPTICAL jack, or when INPUT MODE is set to “ANALOG 2CH FIXED” (page 38).
JMULTI IN: Lights up when “MULTI CH IN” is selected.
KSB DEC: Lights up when surround back decoding is activated (page 34).