When “MENU EXPAND” is set to “ON”, all of the following parameters are displayed and adjustable.
See page 39 for the SURR SET UP menu adjustments. Initial settings are underlined.
All SURR SET UP menu parametersEFFECT LEVEL
C.WIDTH L_C_R* DIMENSION F_I_S*
PANORAMA MODE* FRONT REVERB* SCREEN DEPTH* VIR.SPEAKERS* A.F.D. 2CH SW*
*Adjustable only when “MENU EXPAND” is set to “ON”.
xC. WIDTH L_C_R
(Center width control)
Initial setting: (3)
Lets you perform further adjustments for Dolby Pro Logic II Music and Dolby Pro Logic IIx Music mode decoding. You can set this parameter only when A.F.D. mode is set to “PRO LOGIC II MUSIC” or “PRO LOGIC IIx MUSIC” (page 30).
You can adjust the distribution of the center channel signal, generated through the Dolby Pro Logic II or Dolby Pro Logic IIx decoding, to the L/R speakers.
xDIMENSION F_I_S (Dimension control)
Initial setting: midpoint (0)
Lets you perform further adjustments for Dolby Pro Logic II Music and Dolby Pro Logic IIx Music mode decoding. You can set this parameter only when A.F.D. mode is set to “PRO LOGIC II MUSIC” or “PRO LOGIC IIx MUSIC” (page 30).
You can adjust the difference between the front channels and the surround channels.
xPANORAMA MODE (Panorama mode)
Lets you perform further adjustments for Dolby Pro Logic II Music and Dolby Pro Logic IIx Music mode decoding. You can set this parameter only when A.F.D. mode is set to “PRO LOGIC II MUSIC” or “PRO LOGIC IIx MUSIC” (page 30).
•ON
Lets you enjoy the surround sound by spreading the sound field of front speakers to the left and right of the listening position (panorama mode).
•OFF
Panorama mode is not activated.
xFRONT REVERB (Front reverberation)
This parameter is especially for “D.CONCERT HALL A/B” (page 33). This parameter lets you adjust the amount of reverberations to add to the front signals according to the original reverberations in the source.
•STD
Normally, select “STD”.
•WET
Select to increase front reverberations.
xSCREEN DEPTH (Screen depth)
Lets you create the sensation that the sound of the front speakers comes from inside the screen in your listening room, like theatres.
•ON
Lets you create the sensation that the sound comes from a very large screen with a great amount of screen depth.
•OFF
This function is not activated.
Note
This parameter is only available for Cinema Studio EX modes.
xVIR.SPEAKERS (Virtual speakers)
This parameter is especially for the Cinema Studio EX modes (page 32).
•ON
The virtual speakers are created.
•OFF
The virtual speakers are not created.
xA.F.D. 2CH SW
(Creating, low frequency signals)
•CREATE
Lets you create low frequency signals for output to the subwoofer when “A.F.D. AUTO” is selected.
•OFF
Low frequency signals are not created.
continued
Settings and Adjustments Advanced