Sony STR-DA3100ES 52US, Recording on a video tape, Prepare the component for playing, Select the program source to be recorded

For example, insert the laser disc you want to record into the LD player.

3 Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording.

4 Start recording on the recording VCR, then start playing the video tape or laser disc you want to record.

Notes

• You cannot record a digital audio signal using a component connected to the analog VIDEO 1 OUT or VIDEO 2 OUT jacks.

• Make sure to make both digital and analog connections to the TV/SAT or DVD inputs. Analog recording is not possible if you make only digital connections.

• Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources.

• The analog audio signals of the current input are output from the VIDEO 1 OUT or VIDEO 2 OUT jacks.

• The signals input to the MULTI CH IN jacks are not output from VIDEO 1 OUT or VIDEO 2 OUT jacks even when MULTI CH IN is being used. The analog audio signals of the current or previously used input are output.

Select the program source to be recorded.

Prepare the component for playing.

1

2

Recording on a video tape

You can record from a VCR, a TV, or an LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR if you need help.

52US