xSB DEC MODE [XXXXXXX] (SB DEC MODE)
You can use the CUSTOMIZE menu to set the SB DEC mode, see page 41.
•DDEX
•PLIIx MV
•PLIIx MS
Note
This parameter is valid only in A.F.D. mode (page 30).
x9.1 CH SP SYSTEM [XXX]
(9.1 ch speaker system)
•YES
When two pairs of speakers are connected to SURROUND SPEAKERS in parallel and a pair of speakers are connected to SURR BACK SPEAKERS terminal.
•NO
When only a pair of speakers are connected to either SURROUND SPEAKERS terminals.
Notes
•This function is valid when surround back speakers is set to DUAL only.
•When the IMPEDANCE SELECTOR is set to “8Ω”, connect the speakers with a nominal impedance of 16
ohm or higher. When the IMPEDANCE SELECTOR is set to “4Ω”, connect the speakers
with a nominal impedance of 8 ohms or higher. For details, see “Speaker impedance” page 17.
xA/V SYNC [XXX ms] (Time alignment)
Initial setting: 0 ms
Lets you delay the output of audio to adjust the gap between video and audio. You can adjust from 0 ms to 200 ms in 10 ms steps.
xS.FIELD LINK [XXX] (Sound field link)
• ON
Lets you apply the last selected sound field to an input whenever it is selected. For example, if you select STADIUM for the
• OFF
Sound field link is not activated.
xDEC. PRIORITY [XXXX]
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks.
The initial setting is “AUTO” for VIDEO 1, VIDEO 2, VIDEO 3, TV/SAT, TAPE, TUNER and PHONO, and “PCM” for DVD, MD/DAT and
•AUTO
Automatically switches the input mode between DTS, Dolby Digital, or PCM.
•PCM
PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. When set to “AUTO” and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to “PCM”.
xDUAL MONO [XXXXXXXX]
(Digital broadcast language selection)
Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.
•MAIN/SUB
Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.
•MAIN
Sound of the main language will be output.
•SUB
Sound of the sub language will be output.
•MAIN+SUB
Mixed sound of both the main and sub languages will be output.
xOSD H.POSITION[XX] (OSD horizontal position)
Initial setting: 4
Lets you adjust the position of the
xOSD V.POSITION [XX] (OSD vertical position)
Initial setting: 4
Lets you adjust the position of the
xDIMMER [XX % DOWN] (Brightness of the display)
Lets you adjust the brightness of the display. The DIMMER indicator is lights up when dimmer is activated. When you set to turn off the display completely, the MULTI CHANNEL DECODING indicator is also turned off.