— USER PRESET
You can store the adjusted sound field settings, etc. as USER PRESET up to 3 and can easily apply.
Setting the USER PRESET
1 Adjust the sound field, etc.
For the settings you can store, see “Settings that can be stored in USER PRESET”.
2 Rotate MAIN MENU to select “CUSTOMIZE”.
3 Rotate MENU to select “USER PRESET MEM.? [X]”.
4 Rotate –/+ to select the USER PRESET number.
5
6 To store other settings, repeat steps 1 to 5.
Settings that can be stored in
USER PRESET
•Input selected by the INPUT SELECTOR
•INPUT MODE setting
•Selected sound field
•MULTI CH IN setting
•DIRECT setting
•C.WIDTH setting
•DIMENSION setting
•PANORAMA MODE setting
•EFFECT LEVEL setting
•FRONT REVERB setting
•SCREEN DEPTH setting
•VIR.SPEAKERS setting
•Tuner settings (band, frequency, stereo/mono setting, preset number)
To use the USER PRESET
1 Press USER PRESET repeatedly to select the USER PRESET you want.
2 Press MEMORY/ENTER.
Note
When the DIGITAL ASSIGN setting is changed after you store a USER PRESET and if the stored INPUT MODE setting cannot be used, a selectable setting is applied automatically.
Example:
*1 Use the DIGITAL ASSIGN function to assign “DVD OPT” to “TAPE”.
*2 Set the INPUT MODE of TAPE to “AUTO 2CH” or “OPTICAL FIXED”, then store in the USER PRESET.
*3 Use the DIGITAL ASSIGN function to assign “DVD OPT” to “DVD”.
*4 Select the USER PRESET stored in example 2). The INPUT MODE of TAPE is automatically set to “ANALOG 2CH FIXED”. You cannot select “AUTO 2CH” or “OPTICAL FIXED”.