—TEST TONE
Adjust the speaker levels and balance while listening the test tone from your listening position. Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency centered at 800 Hz.
1 Press ?/1 on the remote to turn on the receiver.
2 Press TEST TONE on the remote.
“TEST TONE” in the LEVEL menu appears in the display and the test tone is output from each speaker in sequence.
3 Adjust the speaker level and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker.
For details on the LEVEL menu settings, see page 39.
Tip
To adjust the level of all speakers at the same time, press MASTER VOL +/– on the remote or turn MASTER VOLUME on the receiver.
4 Press TEST TONE again.
The test tone turns off.
To output the test tone only from a specific speaker
Set “TEST TONE” in the LEVEL menu to “FIX” (page 39). The test tone is output only from the selected speaker.
For more precise adjustment
You can output the test tone or sound source from two adjacent speakers to adjust their balance and level.
Set “MENU EXPAND” in the CUSTOMIZE menu to “ON” (page 41). Then select the two speakers you want to adjust using “PHASE NOISE” or “PHASE AUDIO” in the LEVEL menu (page 46).
Started Getting