Connect the supplied AC power cord to the AC IN terminal on the receiver, then connect the AC power cord to a wall outlet.
AC power cord
AC OUTLET
| AC OUTLET |
RS | SWITCHED 120W/1A MAX |
AC 120V 60Hz |
LCENTER
IMPEDANCE SELECTOR
L
) L
Before using the receiver for the first time, initialize the receiver by performing the following procedure.
This procedure can also be used to return settings you have made to their factory defaults.
1Press ?/1 on the receiver to turn off the receiver.
2Hold down ?/1 on the receiver for 5 seconds.
3While “ENTER to Clear All” appears in the display, press MEMORY/ENTER on the receiver.
After “MEMORY CLEARING...” appears in the display for a while, “MEMORY CLEARED!” appears.
The following are reset to their factory settings.
•MASTER VOLUME.
•All settings in the SPEAKER SET UP,
LEVEL, SURR SET UP, EQUALIZER, CUSTOMIZE, TUNER and CIS menus.
•The sound field memorized for each input and preset station.
•All preset stations.
•All index names for inputs and preset stations.
Started Getting
AC IN terminal
Notes
•The AC OUTLETs on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.
•Make sure that the total power consumption of the components connected to the receiver’s AC OUTLETs does not exceed the wattage stated on the rear panel. Do not connect