4:Connecting the AC power cord

Connect the supplied AC power cord to the AC IN terminal on the receiver, then connect the AC power cord to a wall outlet.

AC power cord

 

 

AC OUTLET

 

SPEAKERS

AC IN

R

SURROUND

L

 

B

 

B

A

 

A

CENTER

AC OUTLET

 

 

 

SURROUND BACK

R

 

L

 

FRONT

 

R

 

L

B

 

B

A

 

A

 

IMPEDANCE USE 4-16

A+B USE 8-16

AC IN

terminal

Notes

•The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.

20US

•Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. This may cause a malfunction.

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure.

This procedure can also be used to return settings you have made to their factory defaults.

1 Press ?/1 to turn off the receiver.2 Hold down ?/1 for 5 seconds.

“ENTER to Clear ALL” appears in the display for 10 seconds.

3 Press MEMORY/ENTER while “ENTER to Clear ALL” appears in the display.

After “MEMORY CLEARING...” appears in the display for a while, “MEMORY CLEARED!” appears.

The following are reset to their factory settings.

•All settings in the SPEAKER SET UP,

LEVEL, SURR SET UP, EQUALIZER, and CUSTOMIZE, CIS, TUNER menus.

•The sound field memorized for each input.

•All index names for inputs.

Note

If “2nd zone on” or “3rd zone on” appears in the display, the initial setup operation cannot be performed. Turn off the indication by following the first tip in “Listening to the sound in another zone” (page 53).