• AUTO
When a DTS 96/24 signal is input, it is played back at 96 kHz sampling frequencies.
• OFF
Even when a DTS 96/24 signal is input, it is played back at 48 kHz sampling frequencies.
Note
This parameter is valid only in the A.F.D. mode (page 31). In other sound fields, this parameter is always set to “OFF”.
x SB DECODING
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the surround back decoding mode. See page 34.
• AUTO
• MATRIX
• OFF
DTS 96/24 DEC. (DTS 96/24 decoding mode)
x
• ON
The advanced parameters for the SPEAKER SET UP, SURR SET UP and LEVEL menus are displayed and can be adjusted.
For details on each setup item, see pages 21, 37, 38 and the following pages.
• OFF
The advanced parameters are not displayed.
MENU EXPAND (Menu expanding)
x
3 Rotate –/+ to adjust the selected parameter.
4 Repeat steps 2 and 3 to adjust the other items.
CUSTOMIZE menu parameters The initial setting is underlined.
Rotate MAIN MENU to select “CUSTOMIZE”.
Rotate MENU to select the parameter.
1
2
Advanced settings
Using the CUSTOMIZE menu to adjust the receiver
You can adjust various receiver settings using the CUSTOMIZE menu.
For advanced EQUALIZER menu adjustments

Use the CUSTOMIZE menu and set “MENU EXPAND” to “ON” to enable advanced adjustments.

For details on “MENU EXPAND”, see page 40. For details on how to set the items, see page 46.

40US