6:Adjusting the speaker levels and balance

—TEST TONE

Adjust the speaker levels and balance while listening the test tone from your listening position. Use the remote for these operations. For details on remote operations, refer to the operating instructions supplied with the remote.

Tip

The receiver employs a test tone with a frequency centered at 800 Hz.

1 Press ?/1 on the remote to turn on the receiver.
2 Touch RM SELECT.
3 Touch AMP.
4 Touch b to display screen 4/6.
5 Touch TEST TONE.

“TEST TONE” in the LEVEL menu appears in the display and the test tone is output from each speaker in sequence.

6 Adjust the speaker level and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker.

For details on the LEVEL menu settings, see page 38.

Tips

•To adjust the level of all speakers at the same time, touch MASTER VOL +/– on the remote or turn MASTER VOLUME on the receiver.

•You can also use –/+ on the receiver for the adjustment.

7 After the adjustment, touch TEST TONE again.

The test tone turns off.

To output the test tone only from a specific speaker

Set “TEST TONE” in the LEVEL menu to “FIX” (page 38). The test tone is output only from the selected speaker.

For more precise adjustment

You can output the test tone or sound source from two adjacent speakers to adjust their balance and level.

Set “MENU EXPAND” in the CUSTOMIZE menu to “ON” (page 40). Then select the two speakers you want to adjust using “PHASE NOISE” or “PHASE AUDIO” in the LEVEL menu (page 45).

24US