SP EASY SET UP
SPEAKER PATTERN
SUB WOOFER
FRONT SP
100˚
120˚
CENTER SP
SURROUND
SURROUND
SURR BACK SP
FRONT XX feet
CENTER XX feet
SURR BACK XX feet
SUB WOOFER XX feet
DISTANCE UNIT*
SP CROSSOVER > XXX Hz*
OUTPUT*
*Adjustable only when “MENU EXPAND” is set to “ON”.
xDISTANCE UNIT (Distance unit)
Lets you select the unit of measure for setting distances.
•feet
The distance is displayed in feet.
•meter
The distance is displayed in meters.
x
(Surround
x
(Surround
Lets you specify the location of your surround speakers for proper implementation of the surround effects in the Cinema Studio EX modes (page 32).
A | A |
B B
D 
D
60
C C
30
•SIDE/LOW
Select if the location of your surround speakers corresponds to section A and C.
•SIDE/HIGH
Select if the location of your surround speakers corresponds to section A and D.
•BEHD/LOW
Select if the location of your surround speakers corresponds to section B and C.
•BEHD/HIGH
Select if the location of your surround speakers corresponds to section B and D.
*This setup item is not available when the surround speaker parameter is set to “NO” (page 22).
Tip
Surround speaker position is designed specifically for implementation of the Cinema Studio EX modes. For other sound fields, speaker position is not so critical. Those sound fields were designed under the premise that the surround speakers would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle. However, if the speakers are pointing toward the listener from the immediate left and right of the listening position, the surround effects becomes unclear unless set to “SIDE”. Nevertheless, each listening environment has many variables, like wall reflections, and you may obtain better results using “BEHD” if your speakers are located high above the listening position, even if they are to the immediate left and right.
continued
Settings and Adjustments Advanced