i.LINK connection
If you have the i.LINK component SCD- XA9000ES, connect to this receiver with an i.LINK cable (supplied with
Notes
•If a metal object should fall into the i.LINK jack,
•Be sure to insert the plug firmly to prevent malfunction.
•For details about compatible signals, see page 63. This receiver cannot process incompatible signals such as DV, MICROMV, or
•Sound fields and LIP SYNC function (page 41) are not activated when DSD signals are input to this receiver.
Establishing a LINCBefore an audio signal can be transmitted between i.LINK components, a LINC (Logical INterface Connection) must first be established between the component receiving the audio signal and the component sending the audio signal. Establishing a LINC means establishing a logical path for the transmission of digital audio signals between the two components. Each logical path has an ID number. Since the component that sends an audio signal must output the signal to a path, and the component that receives the signal must input it from the same path, the path must be mutually known by both components. During the establishment of a LINC, the following communication occurs between the two i.LINK components.
Example
This receiver establishes a LINC with SCD- XA9000ES. Select i.LINK using the INPUT SELECTOR on this unit, and set the player to i.LINK output mode.
1This receiver sends a request and path information to
1
2
<
The digital audio signal transmission becomes possible only after the communication described above has occurred and a LINC has been established.
Notes
The LINC is cancelled in the following cases.
–When i.LINK cable is connected or disconnected.
–When the input selection is switched.
Operations Other