Set to

To select

OFF**

No speaker output.

 

(All the sound output from SPEAKERS

 

and PREOUT jacks are turned off.)

 

 

*When the IMPEDANCE SELECTOR is set to

“8Ω ”, connect speakers with a nominal impedance

of 16 ohm or higher. When the IMPEDANCE SELECTOR is set to “4Ω ”, connect the speakers

with a nominal impedance of 8 ohms or higher.

**When you want to turn off the sound output from SPEAKERS jacks while turning on the sound output from PREOUT jacks, set the SPEAKERS FRONT switch to “A”, “B” or “A+B”, then set “OUTPUT” in the SPEAKER SET UP menu to “PREOUT ONLY” (page 44).

Selecting the surround speaker system

Set the SPEAKERS SURROUND switch according to the surround speakers you want to drive.

Set to

To select

AThe speakers connected to the SPEAKERS SURROUND A terminals (7.1 channel).

BThe speakers connected to the SPEAKERS SURROUND B terminals (5.1 channel).

No sound is output from the surround back speakers.

A+B*

The speakers connected to both the

 

SPEAKERS SURROUND A and

 

SPEAKERS SURROUND B terminals

 

(9.1 channel).

 

When this setting is selected, the

 

parameters set for surround speaker-A in

 

SPEAKER SET UP are also set for

 

surround speaker-B.

 

 

*When the IMPEDANCE SELECTOR is set to “8Ω ”, connect speakers with a nominal impedance of 16

ohm or higher. When the IMPEDANCE SELECTOR is set to “4Ω ”, connect the speakers with

a nominal impedance of 8 ohms or higher.

Notes

•The settings for surround speakers (page 22) can be set separately for the surround speakers connected to SPEAKERS SURROUND A and SPEAKERS SURROUND B terminals.

•Before setting the surround speakers, select the surround speaker system you use.

Operations Other

51US