Required cords

The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (A to J) (not supplied).

A Audio cordG Monaural audio cord

White (L)

Black

Red (R)

Tip

B Audio/video cord

Audio cord A can be torn into two monaural audio

Yellow (video)

cords G.

White (L/audio)

H Component video cord

Red (R/audio)

C Video cord

Green

Blue

Yellow

Red

D S-video cordI DVI cable
E Optical digital cordJ i.LINK cable

 

FCoaxial digital cord

Notes

•Turn off the power to all components before making any connections.

•Be sure to make connections firmly to avoid hum and noise.

•When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.

•When connecting optical digital cords, insert the cord plugs straight in until they click into place.

•Do not bend or tie optical digital cords.

If you have Sony components with CONTROL A1II/CONTROL S jacks

See “CONTROL A1II Control System” on page 55.

If you have Sony component (SCD-XA9000ES) with i.LINK jacks

Use the i.LINK cable (J) supplied with SCD-XA9000ES. For details, refer to the Operating Instructions supplied with SCD-XA9000ES.

See “i.LINK connection” on page 57.

Started Getting

7US