Adjusting the speaker levels and balance
— TEST TONE
Use the remote while seated in your listening position to adjust the level of each speaker.
1 Press ?/1 to turn on the receiver.
2 Press TEST TONE.
“T.TONE” appears in the display and a test tone is output from each speaker in the following sequence:
r
Front (left)
r
Center
r
Front (right)
r
Surround (right)
r
Surround (back)
r
Surround (left)
r
Subwoofer
3 Adjust the LEVEL parameters so that the level of the test tone from each speaker sounds the same when you are in your main listening position.
To adjust the balance and level of speakers, press MAIN MENU repeatedly to select LEVEL menu, then press F/f to select the parameter you want to adjust (page 26). Next, press G/g to select a setting.
4 Press TEST TONE again to turn off the test tone.
Tip
You can adjust the level of all speakers at the same time. Press MASTER VOL +/– on the remote or rotate VOLUME on the receiver.
Notes
•The front balance, center level, surround level, surround back level and subwoofer level are shown in the display during adjustment.
•To enjoy better sound quality, do not turn up the volume of the subwoofer too high.
Components up Hooking
15GB