4 Press SHIFT to select the memory page and press PRESET/CH + or PRESET/ CH – to select a preset number.
If “MEMORY” goes out before you press the preset number, start again from step 3.
5 Press MEMORY again to store the station.
If “MEMORY” goes out before you can store the station, start again from step 3.
6 Repeat steps 2 to 5 to preset another station.
Tuning to preset stations
1 Press TUNER to select the FM or AM band.
Or rotate INPUT SELECTOR on the receiver to select “TUNER FM” or “TUNER AM”.
2 Press SHIFT repeatedly to select a memory page (A, B, C).
3 Press the number button to select a preset station you want.
The selected preset station in the current memory page is tuned in. Press SHIFT to change the memory page.
Direct tuning
You can tune in a station by selecting the frequency directly with the number buttons.
1 Press TUNER to select the FM or AM band.
Or rotate INPUT SELECTOR on the receiver to select “TUNER FM” or “TUNER AM”.
2 Press D.TUNING.
The cursor blinks on the first digit of the frequency.
3 Press the number buttons to enter the frequency you want.
Example 1: FM 102.50 MHz
1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
1 b 3 b 5 b 0
You do not have to enter the last “0” when the tuning step is set to 100 kHz for FM, and 10 kHz for AM.
If you cannot tune in a station and the entered numbers flash
Make sure you’ve entered the right frequency. If not, repeat step 3. If the entered numbers still flash, the frequency is not used in your area.
Operations Basic
19GB