Selecting a DTS 96/24 decoding mode

You can select a decoding mode for DTS 96/24 signals.

1 Press MAIN MENU repeatedly to select the SET UP menu.

2 Press F/f to select “96 XXXX”.

3 Press G/g to select the setting you want.

DTS 96/24 decoding modes

•96 AUTO

When a DTS 96/24 signal is input, it is played back at a sampling frequency of 96 kHz.

•96 OFF

Even when a DTS 96/24 signal is input, it is played back at a sampling frequency of 48 kHz.

Notes

•This parameter is valid only in the A.F.D. mode (page 23). In other sound fields, this parameter is always set to “96 OFF”.

•DTS 96/24 decoding is only valid in the A.F.D. mode (page 23). When the system is set to other sound fields, standard 48 kHz decoding is used.

•Even when a DTS 96/24 signal is input, standard 48 kHz decoding is used if any speakers are set to “SMALL” or if the sub woofer is set to “NO”.

Selecting a surround back decoding mode

This function lets you select the decoding mode for multi channel input stream surround back signals.

By decoding the surround back signal of DVD software (etc.) recorded in Dolby Digital EX, DTS-ES Matrix, or DTS-ES Discrete 6.1 format etc., you can enjoy the surround sound intended by the filmmakers.

Press SURR BACK DECODING on the receiver repeatedly to select the surround back decoding mode.

Or press MAIN MENU on the remote repeatedly to select the SET UP menu. Then select “SB XXXX” using G/g.

For details, see “How to select the surround back decoding mode” on page 31.

Note

You can select the surround back decoding mode only when A.F.D. mode is selected.

30GB