Other Operations/Settings
Switching the audio input mode for DVD playback
You can switch the audio input mode for DVD playback.
1
2 Press INPUT MODE repeatedly to select the audio input mode.
The selected audio input mode appears in the display.
Audio input modes
•AUTO IN
Gives priority to digital audio signals, and specifies analog audio signals input to the analog IN (L/R) jacks when no digital audio signal is present.
•COAX IN
Specifies digital audio signals input to the digital COAX IN jack.
•OPT IN
Specifies digital audio signals input to the digital OPT IN jacks.
•ANALOG
Specifies the analog audio signals input to the analog IN (L/R) jacks.
Selecting the digital audio input decoding priority
You can specify the input mode for digital signals input to the digital input jacks.
1 Press the button for the component (DVD, TV/SAT, HDD/MD) that you want to set.
Or rotate INPUT SELECTOR on the receiver.
2 Press MAIN MENU repeatedly to select the SET UP menu.
3 Press F/f repeatedly to select “DEC. XXXX”.
4 Press G/g to select the setting you want.
Digital audio input decoding priority
The initial setting is “DEC. AUTO” for TV/ SAT, and “DEC. PCM” for DVD and HDD/ MD.
•DEC. AUTO
Automatically switches the input mode between DTS, Dolby Digital and PCM.
•DEC. PCM
PCM signals are given priority (to prevent interruption when playback starts). Even if other signals are input, sound is still output. When set to “AUTO” and output from the digital audio jacks (for CD, etc.) is interrupted after playback starts, set to “DEC. PCM”. Sound may not be output depending on the selected source.
28GB