Sony STR-DB900 manual 33

Remote	Function
button
DISC 9	When operating a CD player or
	video CD player, press to select a
	disc directly (multi-disc changer
	only).
DISPLAY qa	Press to select the information
	displayed on the display of the
	receiver or TV screen.
DUAL MONO	Press to select a bilingual play
w;	mode (Dual Mono).
ENTER (After	Press to select a channel, disc or
pressing ALT)	track after a number button has
qj	been pressed.
FM MODE 5	Press to select FM monaural or
	stereo reception.
HDD	Press to switch the function of the
FUNCTION	hard disc audio recorder.
HDD/CD ws
Input buttons	Press to select the input. Use AV1
wd	and AV2 to select the command
	mode of the remote.
	Note that the inputs are factory-set
	as described in the table above. If
	you want to change the factory
	setting of the buttons to match your
	particular components, do the
	procedure in “Programming the
	remote” (page 38).
	Inputs are assigned to the
	components as follows.
	VIDEO: VCR
	DVD: DVD player
	TV/SAT: TV/tuner
	HDD/MD: Hard disc/MD deck
	TUNER: Built-in tuner
	See “Table of buttons used to
	control each component” on
	page 36 for information about the
	buttons that you can use to control
	each component.
INPUT MODE	Press to select the audio input
qs	mode.
JUMP/TIME*	When operating a TV:
qk	Press to switch between the current
	channel and the previous channel.
	When operating a CD player, video
	CD player or DVD player:
	Press to display the time
	information.
MAIN MENU	Press to select the menu of the
qd	receiver.

Remote	Function
button
MASTER VOL	Press to adjust the volume level of
+/– qf	all speakers at the same time.
MEMORY wj	Press to store radio stations.
MODE wa	Press to select a sound field.
MULTI CH 3	Press to select the components
	connected to the MULTI CH IN
	jacks of the receiver.
MUTING qg	Press to mute the sound.

remote supplied the Using

continued

33GB