Insert two R6
Notes
•Do not leave the remote in an extremely hot or humid place.
•Do not use a new battery with old ones.
•Do not mix manganese batteries and other kinds of batteries.
•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
•When you replace the batteries, the programmed remote codes may be cleared. If this happens, program the remote codes again (page 83).
Tip
Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the receiver, replace all the batteries with new ones.
7:Selecting the speaker system
You can select the front speakers you want to drive.
Be sure to use the buttons on the receiver for this operation.
SPEAKERS (OFF/A/B/A+B)
POWER
|
|
|
|
|
|
|
| MASTER VOLUME |
TONE MODE | TUNING MODE |
|
|
|
| DISPLAY | INPUT MODE | |
TONE |
| TUNING |
|
|
|
| INPUT SELECTOR | |
SPEAKERS |
|
|
|
|
|
|
|
|
(OFF/A/B/A+B) |
|
|
|
|
|
|
|
|
|
| MEMORY/ | DIMMER | 2CH/ | A.F.D. | MOVIE | MUSIC |
|
|
| ENTER | A.DIRECT |
| ||||
VIDEO 2 IN/PORTABLE AV IN |
|
|
|
|
|
|
| |
PHONES |
|
|
|
|
|
|
|
|
VIDEO | L AUDIO R | AUTO CAL MIC |
|
|
|
|
|
|
Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the front speaker system you want to drive.
To select | Light up |
The speakers connected to the | SP A |
SPEAKERS FRONT A terminals |
|
|
|
The speakers connected to the | SP B |
SPEAKERS FRONT B terminals |
|
|
|
The speakers connected to both the | SP A + B |
SPEAKERS FRONT A and B |
|
terminals (parallel connection) |
|
|
|
Press SPEAKERS (OFF/A/B/A+B) repeatedly until the “SP A”, “SP B” and “SP A+B” indicators on the display do not light up. “ALL OFF” appears on the display for a while.
Note
You cannot switch the front speaker system by pressing SPEAKERS (OFF/A/B/A+B) when the headphones are connected.
30GB