Specifications
Amplifier section
Models of area code CEL, CEK, ECE, AU1) Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%) 85 W + 85 W
Stereo Mode Output Power (8 ohms, 1 kHz, THD 0.7%)
100 W + 100 W
Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%)
140 W per channel
Models of area code TW, E511) Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%) 100 W + 100 W
Stereo Mode Output Power (8 ohms, 1 kHz, THD 0.7%)
110 W + 110 W
Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%)
150 W per channel
Models of area code KR1) Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%) 75 W + 75 W
Stereo Mode Output Power (8 ohms, 1 kHz, THD 0.7%)
90 W + 90 W
Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%)
130 W per channel
1)Measured under the following conditions:
Area code | Power requirements |
CEL, CEK, ECE | 230 V AC, 50 Hz |
|
|
AU, E51 | 240 V AC, 50 Hz |
|
|
TW | 110 V AC, 60 Hz |
|
|
KR | 220 V AC, 60 Hz |
|
|
2)Reference power output for front, center, surround and surround back speakers. Depending on the sound field settings and the source, there may be no sound output.
Frequency response |
|
Analog | 10 Hz – 70 kHz, |
| |
| field and equalizer |
| bypassed) |
Input |
|
Analog | Sensitivity: 500 mV/ |
| 50 kohms |
| S/N3): 96 dB |
| (A, 500 mV4)) |
Digital (Coaxial) | Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
Digital (Optical) | S/N: 100 dB |
| (A, 20 kHz LPF) |
Output (analog) |
|
AUDIO OUT | Voltage: 500 mV/ |
| 10 kohms |
SUBWOOFER | Voltage: 2 V/1 kohm |
Equalizer |
|
Gain levels | ±10 dB, 1 dB step |
3)INPUT SHORT (with sound field and equalizer bypassed).
4)Weighted network, input level.
FM tuner section
Tuning range | 87.5 MHz – 108.0 MHz | ||
Antenna (aerial) | FM wire antenna (aerial) |
| |
| |||
Antenna (aerial) terminals |
| ||
InformationAdditional | |||
|
| ||
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
continued
97GB