Changing the display

You can check the sound field, etc., by changing the information on the display.

Be sure to use the buttons on the receiver for this operation.

Press DISPLAY repeatedly.

Each time you press the button, the display changes cyclically as follows:

All inputs except the FM and AM band

Index name of the inputa) t Selected input

tSound field currently applied t Volume level t Stream info

FM and AM band

Program Service nameb) or preset station namea) t Frequency t Program Type indicationb) t Radio Text indicationb) t Current Time indication (in 24-hour system mode)b) t Sound field currently applied

a)Index name appears only when you have assigned one to the input or preset station (page 67, 80). Index name does not appear when only blank spaces have been entered, or it is the same as the input name.

b)During RDS reception only (Models of area code CEL, CEK, ECE only) (page 68).

Note

Character or marks may not be displayed for some languages.

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time.

Press SLEEP repeatedly while the power is on.

“SLEEP” lights up in the display.

Each time you press the button, the display changes cyclically as follows:

OFF t 0:30:00 t 1:00:00 t 1:30:00 t 2:00:00

Tip

To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled.

Operations Other

81GB